Chan J.F.L. & Braiden, P.M. Thermal conditions for sharp and
worn cutting tools, and the consequences for tool failure, Advances in
Manufacturing Technology V, Proc. 6th. National Conf. on Production Research,
Ed. A Carrie & I Simpson, Sept 1990, pp389-394, ISBN 0 902013 72 6.
Chan J.F.L. & Braiden, P.M. The effect of flank wear on the failure
of metal cutting tools in intermittent cutting. Proc 13th. Canadian Cong.
on Applied Mechanics, University of Manitoba, Winnipeg, Canada, June 1991,
V2, pp.696-697. ISBN 0920049 04.
Chan J.F.L. & Braiden, P.M. The effect of reverse shear on the
failure of metal cutting tools, Computer-Aided Production Engineering Ed
by V.C. Venkatesh and J.A. McGeough. Proc 7th Int. Conf. on Computer-Aided
Production Engineering, Pub. Elsevier, Sept. 1991, pp75-82. ISBN
0 444 89214 1. See also Jnl. of Materials Processing Technology, Sept.1991.
Qian Z.Q., Chan J.F.L. & Braiden, P.M. The effect of built-up
edge on tool failure in intermittent cutting, Advances in Manufacturing
Technology VI Ed. D. Spurgeon & Apampa, O. Proc. 7th Nat. Conf. on
Production Research, Hatfield U.K., Sept. 1991, pp271-276, ISBN 0 900458
46 1.
Braiden, P.M., Alderman, N. & Thwaites A.T. Engineering design
and product development and its relationship to manufacturing. Strategic
and Operational Issues in Production Economics, Proc. 7th Int. Seminar
on Production Economics, Igls, Austria, Feb. 1992, pp63-75. ISBN
0-444-81689-5.
Qian, Z.Q. Chan J.F.L. & Braiden P.M. Thermal shock at
tool/work engagement in an intermittent cutting operation, Proc. 8th. Int.
Conf. on Computer-Aided Production Engineering, Edinburgh, August 1992,
pp111-117.
Qian, Z.Q. Chan J.F.L. & Braiden, P.M. Mechanics of chip formation
at tool/work disengagement in intermittent metal cutting, Proc. 8th. Nat.Conf.
on Prodn. Research, Birmingham, UK., Sept. 1992, pp106-110.
Qian, Z.Q., Chan J.F.L. & Braiden, P.M. The failure of metal
cutting tools at tool/work disengagement, Proc. 30th. Int. MATADOR Conf.,
Manchester, U.K., March 1993, pp181-186.
Qian, Z.Q., Chan J.F.L. & Braiden, P.M. A plasticity analysis
for the transient state of stresses generated in a metal cutting tool at
tool/work engagement, Proc. 4th Int. Conf. on the Technology of Plasticity,
Beijing. Sept. 1993, V1, pp400-407. Int. Academic Publishers,
ISBN 7-80003-267-5/TG.20.
Braiden P.M. Business Process Re-Engineering, (Video, with case studies),
Pub. Point 6 Productions, November 1993.
Zhu, Z.Y., Chan, J.F.L. & Braiden, P.M. Rotation of the primary
plastic deformation zone at tool/work disengagement in metal machining.
Proc. Conf. Advances in Engng. Plasticity and its Application, Beijing,
June/July, 1994, p.123.
Zhu, Z.Y., Chan, J.F.L. & Braiden, P.M. Critical exit distance
and tool failure at the exit of a cut. Proc. Eurometalworking, EMW94,
Udine, Italy, Sept. 1994, pp. 40-48.
Hicks, C. & Braiden, P.M. Competitive issues in make to order
manufacturing, IMSE94, Proc. European Workshop on Integrated Manuf. Systems
Engng., Grenoble, Dec. 1994. pp. 395-408.
Hicks, C. & Braiden, P.M. Company classification and manufacturing
control and resource issues in make to order manufacturing; Proc. European
Conf. on the Management of Technology, Technological Innovation and Global
Challenges, Ed. Bennett D. and Steward F., Birmingham, July 1995, pp. 485-493.
ISBN 1-85449-275-6.
Maffin, D., Alderman, N., Braiden, P.M., Hills, W. & Thwaites, A.
Company classification, a new perspective on modelling the Engineering
Design and Product Development Process, Jnl. of Eng. Design, v.6, no. 4,
1995, pp. 275-289, ISSN 0954-4828.
Alderman, N., Braiden, P.M., Hills, W., Maffin, D., Thwaites, A. &
Vaughan, R. Business process analysis and technological change in
the capital goods industry, Paper No. 124, Proc. 2nd. Int. Conf. on Managing
Integrated Manufacturing (MIM96), Leicester, June 1996.
Maffin, D., Thwaites, A., Alderman, N., Braiden, P.M. & Hills, W.
Managing the product development process: combining best practice with
company and project contexts. Technology Analysis and Strategic Management,
v.9, n.l, 1997, pp. 53-74, ISSN 0953-7325.
Alderman, N., Maffin, D., Thwaites, A., Vaughan, R, Braiden, P.M. &
Hills, W. Providing customer value: A business process analysis approach;
in D.T. Wright, M.M. Rudolph, V. Hanna, D. Gillingwater and N.D. Burns
(eds) Managing Enterprises - Stakeholders, Engineering, Logistics and Achievement,
Mechanical Engineering Publications Ltd., Bury St, Edmunds, pp. 203-209,
ISBN 1-86058 066 1.
Sitoh P.J., Braiden P.M. and Simmons J.E.L., The development of a
method for determining the efficiency and effectiveness of installed CAPM
systems. Int. Jnl. of Production Economics, 56-57, 1998, pp587-599.
Alderman N., Braiden P., Hills W., Maffin D., Thwaites A., Vaughan R.,
Business process analysis and technological change in the capital goods
industry, Int. Jnl. Computer Applications in Technology, v11, n6, 1998,
pp418-427.
Cameron N., and Braiden P. M., Assessing the methodologies of business
process re-engineering, Advances in Manufacturing Technology XIII,
pp395-401, Edited A.N. Bramley, l.B. Newnes, W.G. Owen, Pub. Professional
Engineering Ltd., London., ISBN 1 86058 227 3. Proc. 15th National
Conf. on Manufacturing Research, Bath, Sept. 1999.
Alderman N., Thwaites A., Vaughan R., McLoughlin I., & Braiden
P. M. Strategic Procurement and Knowledge Management in Long Term Engineering
Projects, Proc. British Academy of Management Conf., Productions and Operations
Track, Manchester, Sept. 1999.
Maffin D and Braiden P. M. Manufacturing and supplier roles in product
development, Int Jnl. Production Economics, v69, n2, 2000, pp391-400
Braiden P. M. and Hicks C., Some observations on knowledge management activities
in the design and manufacture of engineered to order capital goods, Proc.
KNOW99, Deciphering Knowledge Management, New Directions in Research, Theory
and Practice, Sidney, Australia, Nov. 1999 pp 217-224 ISBN 1-86365-688-X
Hicks C. and Braiden P. M. Assessing knowledge management activities in
the design and manufacture of engineered to order capital goods, Knowledge
Management: Concepts and Controversies, Univ. Warwick 10/11 Feb 2000.
Pongcharoen P., Hicks C., Braiden P. M. & Metcalfe A. V. Stephenson
D., Using genetic algorithms for scheduling the production of capital goods,
Proc 11th. Int. Working Seminar on Production Economics, Feb 2000 Igls,
Austria, Vol. 3, pp 429-458.
This page was produced by Chris Hicks October 2000
