Publications

Journal papers

  • J. Munguia, S. Akande, K.W. Dalgarno, Compliant flexural behaviour in laser sintered nylon structures: Experimental test and Finite Element Analysis – correlation, Materials & Design, Volume 54, February 2014, Pages 652-659, ISSN 0261-3069
  • Munguia J, Dalgarno KWD. Fatigue behaviour of laser sintered PA12 specimens under four-point rotating bending. Rapid Prototyping Journal. 2014 (Accepted –in press)
  • Telfer S, Munguia J, Pallari J, Dalgarno J, Steultjens M, Woodburn J. Personalized foot orthoses with embedded temperature sensing: Proof of concept and relationship with activity. Medical Engineering and Physics. 2013
  • Telfer S, Pallari J, Munguia J, Dalgarno K, McGeough M, Woodburn J. Embracing additive manufacture: implications for foot and ankle orthosis design. BMC Musculoskeletal Disorders. 2012;13:84
  • Javier Munguia, Alain Bernard, Merve Erdal, (2011) “Proposal and evaluation of a KBE-RM selection system”, Rapid Prototyping Journal, Vol. 17 Iss: 4, pp.236 – 246
  • Javier Munguía; Joaquim Ciurana, PhD.; Carles Riba, PhD. A Neural Network-based model for build time estimation in selective laser sintering Proc. IMechE, Part B: J. Engineering Manufacture, 2009, 223(B8), 995-1003.
  • Javier Munguía, Sonia Llorens, Joaquim LLoveras and Tahar Laoui.  “Development of an AI-based Rapid Manufacturing advice system”. International Journal of Production Research Taylor & Francis. ISSN: 0020-7543, 2009.
  • Javier Munguía, Joaquim de Ciurana, Carles Riba  Pursuing successful rapid manufacturing: A user’ best-practices approach. Rapid Prototyping Journal; Volume 14; Issue 3; 2008

Peer reviewed conference proceedings

2013

  • Manufacturing the Future Conference. EPSRC- UK. Cranfield, UK. Sep. 2013. “Design and fabrication of orthotic devices through additive manufacturing”. J Munguia, KW Dalgarno.
  • European Society of Biomechanics. ESB2013. Patras, Greece, Aug. 2013 “ADVANCED ORTHOTICS VIA ADDITIVE MANUFACTURING: FROM LOW-COST TO HIGH-END DESIGN”. J Munguia, KW Dalgarno & J Pallari.
  • Solid Free Form Fabrication Symposium. Austin, Texas, EE.UU. Aug. 2013. “ANKLE FOOT ORTHOTICS OPTIMIZATION BY MEANS OF COMPOSITE REINFORCEMENT OF FREE-FORM STRUCTURES “.J Munguia, KW Dalgarno.
  • 1st Mexican Workshop on Additive Manufacturing  MXWAM 2013. Monterrey, México. “Design for AM: from design to manufacture of personalized products“.J Munguía
  • 1st Mexican Workshop on Additive Manufacturing  MXWAM 2013. Monterrey, México. “El ABC de la manufactura aditiva: una industria en ascenso“. J Munguía

2012

  • ICAT 2012 International Conference on Additive Technologies. Maribor, Slovenia. Sep 2012. “DELIVERING PERSONALISED ORTHOTICS VIA ADDITIVE MANUFACTURING.J. Munguía, and K.W. Dalgarno.
  • International Society of Prosthetics & Orthotics -ISPO UK MS 40th Anniversary Meeting 27th & 28th September 2012. Sheffield, UK  “Personalised foot orthotics with embedded temperature sensing: proof of concept and correlation with activity”. Telfer, Munguía, Pallari, et al.
  • Kongress ORTHOPÄDIE + REHA-TECHNIK 2012. Leipzig, Germany. “Productivity considerations for Additive Manufacturing of Customised Orthotics”. Javier Munguia, KW Dalgarno.

2011

  • RDPM 2011. 12th Conference on Rapid Design, Prototyping & Manufacturing (RDPM 2011), Fatigue Testing procedures for Polymer Additive Manufacturing and purpose-built rotating fatigue rig. Munguia J & Dalgarno K. Lancaster, UK, June 2011
  • Intelligent monitoring of ankle-foot and functional foot orthoses through embedded sensors. Louis Peeraer, Luiza Muraru,, Roy Sevit, Javier Munguia, Kenny Dalgarno.

2010

  • ICADI 2010, International Conference on aging, disability and independence. Presentation title: Personalized fabrication: A novel approach for foot orthotic design and manufacture. Munguia FJ, Dalgarno KW. Newcastle upon Tyne, UK
  • ISPO. The International Society for Prosthetics and Orthotics, UK meeting. Newcastle. A-FOOTPRINT: Ankle and Foot Orthotic Personalisation via Rapid Manufacturing. Authors: Munguia, J, Cook, S, Telfer S,  Woodburn J, & Dalgarno K., Newcastle upon Tyne, UK

2009

  • Rapidtech 2009. US- Turkey workshop on Rapid Technologies. Istanbul Technical University. Istanbul Turkey. “An educational tool for Rapid Manufacturing feasibility evaluation”.  Authors: Javier Munguía (UPC), Carles Riba (CDEI) September 24-25 2009. Video Available on http://www.youtube.com/watch?v=bpq6xmmfnqI
  • XIII International Congress on Projects Engineering. Badajoz, Spain.  Desarrollo de una herramienta de selección de procesos de fabricación basada en técnicas de inteligencia artificial Authors: Javier Munguía (UPC), Joaquim Minguella (Fundacio CIM)  July  8-10, 2009
  • XIII International Congress on Projects Engineering. Badajoz, Spain.  Sobre el diseño accesible y la discapacidad en el entorno laboral: la experiencia en el proyecto INREDIS. Authors: Javier Munguía (UPC), Ignacio Madrid (Technosite) Lourdes González (Technosite)  July  8-10, 2009
  • 4th International Conference on Advanced Research in Virtual and Rapid Prototyping. Instituto Politécnico de Leiria, Portugal. Oral presentation: “An automated method for RM feasibility evaluation. Authors: Javier Munguía, Felip Fenollosa (Fundacio CIM) October 6-10 2009
  • 4th International Conference on Advanced Research in Virtual and Rapid Prototyping. Instituto Politécnico de Leiria, Portugal. Oral presentation: Breaking paradigms – The teaching of RM to “experienced new comers”. Authors: Javier Munguía, M. Villegas (Fundacio CIM) October 6-10 2009

2008

  • The 2nd International Conference on Additive Technologies; DAAAM Specialized Conference September, 17th – 18th, 2008, Ptuj, Slovenia. A soft computing-based model for RM selection and cost estimation. MUNGUIA, Javier
  • 12th International Research/Expert Conference. ”Trends in the Development of Machinery and Associated Technology”. TMT 2008, Istanbul, Turkey, 26-30 August 2008 Title: An expert rule-based system for additive manufacturing. Authors: Javier Munguia, Carles Riba
  •  4th annual IEEE Conference on Automation Science and Engineering, IEEE CASE (IEEE Robotics and Automation Society) Paper: A concurrent Rapid Manufacturing advice system. Authors: Javier Munguía, Carles Riba Washington, D.C., USA August 23-26, 2008
  • 2007
  •  3rd International Conference on Advanced Research in Virtual and Rapid Prototyping. Instituto Politécnico de Leiria, Portugal. Oral presentation: “Pursuing successful Rapid Manufacturing in a standards-less industry: a best practice approach”. Javier Munguía. September 24-26 2007.
  • XI International Congress on Projects Engineering. Lugo, Spain.  Poster presentation: Mass Customization: Its effective application through Additive manufacturing. Authors: Javier Munguía, Guido Charosky.  September 28, 2007
  • XI International Congress on Projects Engineering. Lugo, Spain. Oral presentation: Best practices in Rapid Manufacturing, strategies of engineering centres that apply rapid prototyping technologies for fabrication.   Javier Munguía, Carles Riba. September 28, 2007
  •  9th International Conference on Engineering & Product Design Education Shaping the Future? Northumbria University, Newcastle upon Tyne, UK.    Oral presentation: ” Introduction of a Design for Rapid Manufacturing (DFRM) perspective in engineering design education” Sandor Campos , Javier Munguía, Joaquim Lloveras PhD.  September 13, 14,  2007.
  • International Conference on Engineering Design 2007 (ICED 07).  Paris France. Poster presentation:  “In the search of Design for Rapid Manufacturing strategies to solve functional and geometrical issues for small series production” Authors: Javier Munguía,  Carles Riba PhD.& Joaquim Lloveras PhD. August 28- 31 2007.

2006

  • X International Congress on Projects Engineering. Valencia, Spain. Oral presentation: “Rapid prototyping processes characterization as a design tool for Rapid manufacturing design”. 13,14, 15 September 2006
  • XVIII International congress of Graphic Engineering INGEGRAF. Barcelona, Spain. Oral Presentation: “Paradigm changes in mechanical design due to emerging rapid prototyping techniques”. May 31- June 1,2,  2006

 

Download Full CV